A D2C brand can grow revenue, report a strong ROAS and still run out of cash. Discounts, shipping, returns and payment fees can all quietly eat the money that dashboards count as success. Contribution margin shows what remains from each sale after the costs that come with it. Most brands use three levels, CM1, CM2 and CM3, and they are simple to calculate once you have clean data. They also change decisions: which products to push, how much to bid, whether a discount was worthwhile and whether growth is actually adding money. This guide explains each level with a worked Indian example. Terms vary across companies and advisers, so agree your own definitions with your finance lead.
What does contribution margin show that ROAS cannot?
ROAS only compares ad-platform revenue with ad spend. It ignores what it costs to make and deliver the product, and platform-reported revenue may include orders that later get cancelled or returned.
Two brands can show a ROAS of 3 with very different realities. One may have strong margin and few returns. The other might lose money on every order. Contribution margin shows the difference.
It also answers practical questions:
- How much can I afford to spend to get an order?
- Which products make money, and which only produce revenue?
- Did that sale event add profit, or just move revenue forward?
- Should I push a marketplace or my own site?
- Does growing further improve or worsen the business?
Contribution margin does not replace full profit. It leaves out most fixed costs, like salaries, rent and software. Treat it as a measure of how much each order contributes towards those costs. Our articles on why ROAS can mislead and MER vs ROAS cover the measurement side.
Read the transcript
Return on ad spend looks great. The bank balance does not. For D2C brands, revenue in a dashboard is not the same as money made.
Return on ad spend counts orders. It ignores what they cost you. COD returns and discounts rarely reach the dashboard. Growth can look healthy and still drain cash.
Stop optimising for revenue. Start with margin.
See CM1, CM2 and CM3 by product and channel. Move budget towards what actually makes money. Nudge COD to prepaid and report delivered orders.
D2C performance marketing, with Rahul D Sarker. Book a call at rahuldsarker.co.
What are CM1, CM2 and CM3?
A common way of structuring these levels is below. Decide where borderline costs belong, then keep them there.
| Level | Calculation | Answers | Usually owned by |
|---|---|---|---|
| Net revenue | Gross sales minus discounts, GST, cancellations and returns | What did we really earn from orders? | Finance |
| CM1 | Net revenue minus cost of goods (product, inbound freight, duties) | Is the product itself profitable? | Founder, product, sourcing |
| CM2 | CM1 minus variable fulfilment: shipping, packaging, payment and COD fees, warehousing per order, RTO and return costs | Does an order make money before marketing? | Operations |
| CM3 | CM2 minus variable marketing: ads, agency percentage, influencer and affiliate costs | Is the marketing-driven sale profitable? | Growth or CMO |
Some brands add CM4 for fixed marketing or team costs. Others include returns earlier. Consistency matters more than the label.
A worked example
Here is one order at a made-up Indian skincare brand. The figures are illustrative, so replace them with your own. All amounts are per order, averaged across delivered and failed orders.
| Line | Amount | Running total |
|---|---|---|
| MRP or gross price, including GST | ₹1,180 | |
| GST at an assumed 18% | -₹180 | ₹1,000 |
| Discounts | -₹100 | ₹900 |
| Value lost to returns and RTO | -₹90 | ₹810 net revenue |
| Product cost | -₹230 | ₹580 CM1 (72% of net revenue) |
| Shipping | -₹80 | ₹500 |
| Packaging | -₹25 | ₹475 |
| Payment and COD fees | -₹25 | ₹450 |
| Return shipping and write-offs | -₹60 | ₹390 CM2 (48%) |
| Ads and variable marketing | -₹280 | ₹110 CM3 (14%) |
Example only. Your GST rate depends on the product, and net revenue must follow your accounting treatment. Discuss specifics with your accountant.
How do you calculate break-even ROAS from CM2?
CM2 tells you how much you can spend on marketing per order before you start losing money on that order. It gives you the break-even point:
Break-even ROAS = net revenue ÷ CM2
Using the example: ₹810 ÷ ₹390 gives about 2.08. On net revenue, a ROAS below about 2.1 loses money on the first order.
Be careful, as ad platforms typically report gross or pre-return revenue, not net revenue. Their number will usually look higher than what you actually receive, so adjust it. Using the same example, the platform might show ₹1,000 or more against ₹280 spend, or a ROAS of about 3.6, whereas the true net figure is ₹810 ÷ ₹280, or about 2.9.
Your target will often differ from break-even. New customer acquisition may be worth accepting at a lower first-order margin if repeat purchases are strong and cash allows it. Your target should also leave enough to cover fixed costs and profit. Read how to set target CPA and ROAS for the method. Use the performance marketing margin protector to test scenarios.
Handle RTO and returns properly
In India, a large source of error in margin reports is cash on delivery. A shipped order is not revenue, and a returned order costs money on top of that.
Handle them this way:
- Count revenue when delivered, or apply a realistic expected delivery rate to recent orders that are still in transit. Use your actual delivery rate by product and pincode.
- Allocate failed-delivery costs to the orders that caused them. The shipping both ways on a failed order is a real cost of doing business with COD.
- Allocate write-offs. Damaged, expired or unsellable stock should be included.
- Split reports by payment method. Prepaid and COD often have very different CM2. See our guide to converting COD to prepaid.
- Update recent weeks. Recent margin is an estimate until returns have settled. Recalculate previous weeks once the actual results are in.
Marketplaces need separate handling, because of commissions, fulfilment fees and advertising, and they may have different return patterns. The same applies to quick commerce. Do not mix them all into one average, or you will not see which channel is actually paying. The RTO-adjusted ROAS guide goes deeper into this calculation.
How to build the report
You do not need a complicated system to begin with. A monthly and then weekly spreadsheet, built from these sources, can do the job:
- Orders: store platform, with net revenue, discounts and products.
- Product cost: a maintained table of cost per SKU, with inbound freight and duties.
- Logistics: courier invoices or your shipping platform, by order.
- Payment: gateway and COD settlement reports.
- Returns and RTO: status by order, updated as they settle.
- Marketing: spend by platform, agency fees and influencer payments.
Then calculate CM1, CM2 and CM3 by:
- Total company.
- Sales channel, such as your site, marketplaces and quick commerce.
- Product or category.
- New versus repeat customers.
- Campaign, as far as your attribution allows.
- Payment method.
Reconcile it each month with your accountant's numbers. They will not match line by line, as accounting timing differs, but large gaps need explanation. Once you trust the sheet, you can automate it with connectors, a marketing dashboard or a tool built for D2C finance data.
Decisions contribution margin should change
A report only matters if it changes what you do. Good uses include:
- Bidding and budget. Move spend towards products and campaigns with stronger CM3, rather than just higher platform ROAS.
- Product focus. A best-seller by revenue may have poor margin once returns are counted. Consider a price change, a different pack, a bundle or lower ad support.
- Discount policy. Compare the margin from a sale period, including the sales you would have made anyway, against your normal period. Sales events often look better on revenue than on CM3.
- Shipping and pricing thresholds. Test free shipping thresholds and bundles that raise order value without extra shipping cost.
- Channel mix. Compare your own site with marketplaces after all fees. See quick commerce ads.
- Retention investment. Repeat customers often have higher CM3, as they need less ad spend. This gives you a number to justify retention work. See our LTV optimisation service.
- Hiring and fixed costs. Total CM3 tells you how much fixed cost the business can carry.
CM3, first orders and customer lifetime value
A negative or thin first-order CM3 is not always wrong. Many D2C brands accept it to acquire customers who buy again. Still, it must be a deliberate choice backed by data rather than hope.
Check these:
- Cohort payback. Group customers by first-order month. Track cumulative CM2 per customer over time, minus the acquisition cost. How long before each cohort turns positive?
- Repeat rate by product. Consumables like skincare, food and supplements often behave very differently from one-time items.
- Cash available. Can you fund the gap until payback? Check CAC payback against your runway.
- Quality of repeat. Repeat purchases that rely heavily on discounts or ad spend are worth less.
- Fully loaded CAC. Include agency fees and creative costs, as our fully loaded CAC article explains.
Avoid using lifetime value projections from a small sample to justify high spend. Use actual cohort data wherever you can. If you need help building this operating view, a fractional CMO for D2C brands typically starts here, because the margin picture decides almost everything else.
FAQ
It depends on category, price, repeat rate and stage. There is no single good number. Compare your own trend by product and channel, and use sourced benchmarks only for context. CM3 should eventually cover your fixed costs and leave a profit.
Variable agency fees, such as a percentage of spend, usually do. Fixed retainers are often placed below CM3 or in a separate level. Choose a rule, write it down and apply it consistently.
Not quite. Gross margin usually looks at revenue minus cost of goods, which resembles CM1. Contribution margin goes further and subtracts other variable costs like shipping and marketing. Accounting definitions can vary, so check with your accountant.
Check weekly for marketing and operations decisions, and monthly for reconciliation with finance. Remember that recent weeks remain estimates until returns and RTO settle, so update them later.