Few things make a media buyer more nervous than a conversion column that suddenly reads zero. Automated bidding depends on that signal, so broken tracking can quickly start affecting spend and results. The instinct is to change the campaign. Don't. First work out whether you have a tracking problem, a reporting delay or a real fall in leads. This guide gives you an ordered checklist. Each step rules out one kind of failure, so you do not end up reinstalling tags when the real issue is a goal setting. Google's own [conversion tracking troubleshooter](https://support.google.com/google-ads/troubleshooter/13455130) sits alongside this if you need the official steps.
Is your Google Ads conversion tracking really broken?
Compare three numbers for the same dates before you touch anything:
- Conversions in Google Ads.
- The same event in GA4, or your site's own form or order log.
- Leads or orders in your CRM or store from paid traffic.
Then read the pattern.
| Google Ads | Site or CRM | Probably means | Go to |
|---|---|---|---|
| Zero or sharply down | Normal | Tag, GCLID, consent or goal problem | Steps below in order |
| Down | Also down | Real demand or site problem, or a broken form | Test the form and landing page first |
| Too high | Normal | Duplicate tags, or counting page loads | Check for duplicate firing |
| Down only for recent days | Normal | Conversion delay, as conversions are reported by click date | Compare older dates after a few days |
| Zero since a site change | Normal | Redesign, consent banner or new thank-you page | Check the release log, then the tag |
Read the transcript
You can see what you spent. Not what it earned. If tracking stops at the form, you are setting budgets without the revenue data.
Ad platforms and your CRM disagree. Signal is lost at every step of the journey. So budget follows whichever report is loudest.
Connect the ad click to the closed deal.
Tracked from the ad click to closed revenue. Each stage keeps its source and click ID. Budget decisions come from one trusted report.
Marketing attribution, with Rahul D Sarker. Book a call at rahuldsarker.co.
Step 1: read the conversion action status
Go to Goals, then Conversions, then Summary, and look at the status of each action. Google has been changing these labels, so older guides may use different words. In general:
- Recording or active: Google is receiving conversions. If numbers still seem wrong, the issue may be in the goal, attribution or duplicates.
- Needs attention: something should be fixed, but conversions have not stopped altogether. Read the detail message.
- Misconfigured, or the older "Inactive" and "Tag inactive": the tag is not being seen, or the setup has failed.
- Awaiting conversions, or the older "No recent conversions": the tag may be fine, but no conversion has been recorded lately. This is common with low volume or little traffic to the conversion page.
- Unverified: Google has never confirmed the tag.
Status updates can take time, so an action changed today may not be updated straight away. Also check whether you have several actions covering the same event. A previous agency may have left an old action in use while you have been checking a new one.
Step 2: check the tag fires on the real event
Now run through a real conversion yourself. Use Google Tag Assistant in a fresh window and complete the form or purchase. A test lead is fine, as long as you mark it in the CRM so that sales can ignore it.
Check that:
- The Google tag loads on the landing and conversion pages, including any new template.
- The conversion ID and label match the action in Google Ads.
- The trigger matches reality. A thank-you page rule fails if the site no longer redirects after a form. A form submit trigger may fire on failed validation, or not fire at all if the form runs inside an iframe.
- The event fires once. Refreshes or several triggers can cause duplicates.
- The value and currency are valid for purchases. Mistakes here can distort reporting and bidding. Remember your actual policy on values.
- Google Tag Manager changes are published, in the correct container and environment.
Most tag failures come from a site change no one mentioned to marketing. Ask what was released on the date the numbers changed. If this keeps happening, a Google Tag Manager audit can add QA checks to your release process.
Step 3: check that the GCLID survives
Google Ads attributes website conversions using the click identifier, or GCLID, which is added to your landing page URL when auto-tagging is enabled. If it gets lost, conversion tracking can fail, even with a perfect tag.
Check these:
- Auto-tagging is on. In account settings, confirm it has not been turned off.
- The parameter stays in the URL. Click a real ad or use a preview URL with a test value, and see whether the parameter remains after any redirects. Some servers, CMS rules and URL rewrites strip unknown parameters.
- The Conversion Linker runs. If you use Google Tag Manager, a Conversion Linker tag should fire on all pages. If you use the Google tag directly, this is handled for you.
- The domain does not change without a linker. If conversions happen on a different domain, you need linker settings. Our cross-domain guide covers this.
- Cookies are allowed. Consent choices and browser restrictions can affect storage.
- The form passes the click ID. If you import offline conversions, the CRM needs a hidden field for GCLID. Test whether it reaches the record.
This is often the reason for "the tag fires but no conversions show". The tag has sent a signal, but Google cannot connect it to a click.
Step 4: check consent settings
Since Consent Mode became important for measurement in many regions, a changed cookie banner can quietly alter conversion data. A sudden drop right after a banner change is a major clue.
Look at these:
- Does the consent platform set default and updated states correctly, before tags fire?
- Do tags respect a refusal, but still work after acceptance?
- Have you changed which region gets which default?
- Are Google tags showing as "Consent mode active" in Tag Assistant?
- Is the banner preventing form completion, particularly on mobile?
Do not try to fix a fall in consent by weakening privacy controls. Fix the implementation, and accept that some loss of observed data may be real. Enhanced conversions and modelled conversions can recover part of the picture, subject to consent and the requirements of your region. See our articles on Consent Mode v2 and DPDP in India and enhanced conversions for leads.
Step 5: check goals, attribution and columns
Tracking may be fine while reporting makes it look broken. Check the account's settings:
- Primary or secondary. Only primary actions in an active goal appear in the main Conversions column and are used by bidding. A secondary action appears in All conversions. Add the All conversions column to compare.
- Campaign goal settings. A campaign can use account defaults or its own campaign-specific goals. Confirm that yours includes the right action.
- Conversion date. Google Ads usually reports a conversion against the date of the click, not the date it happened. Last week's clicks may still be adding conversions. Add "Conversions (by conv. time)" for comparison.
- Conversion window. A short window can miss long consideration periods, especially in B2B.
- Attribution model. Data-driven attribution can distribute credit across campaigns, which can show fractional conversions.
- Count setting. "Every" or "One" matters. For leads, "One" is usually sensible. For purchases, "Every" is common.
- Date comparison. Compare whole weeks, and allow for lag.
- GA4 imports. If you import from GA4, the conversion may appear later, because of processing and attribution differences. Don't count both a Google Ads tag and an imported GA4 event as primary for the same action.
Step 6: offline conversions and uploads
If you send CRM stages back to Google Ads, the failure may be in that pipeline rather than on the website. Our offline conversion import guide for Zoho and WhatsApp lead tracking guide go into more detail. Check the common causes:
- Missing GCLIDs. Leads from a form that did not pass the ID cannot match. Sample recent records.
- Upload diagnostics. Look at the Uploads page and the diagnostics for rejected rows and error messages.
- Time format. Conversion timestamps need the correct time zone format.
- Click too old or too recent. The conversion must fall within the action's window, and it must occur after the click.
- Wrong action name. It must exactly match the action in Google Ads.
- Integration failures. Zapier, Make or native connectors can fail silently when an authentication token expires. Set an alert.
- Lifecycle stage changes. If someone renames a CRM stage, the workflow that triggers the upload might stop.
Offline conversions are also subject to time lags, so allow for this when checking. A small test with known leads usually finds the problem quickly.
What should you do with bidding while tracking is broken?
Automated bidding reacts to conversion data. If tracking is badly broken, it may reduce or misdirect spend. The right response depends on how long it has been broken and how much you spend.
- Short outage, quick fix: often you can fix it and leave the campaigns alone, as frequent changes cause their own learning disruption.
- Longer outage or a big budget: consider reducing budgets or using a temporary setting, based on the size of the risk.
- Data exclusions: Google offers data exclusions for periods affected by a conversion tracking outage in smart bidding. Use them where eligible, so the system does not learn from false data.
- Reduced conversions due to a site outage: treat the site issue first.
Afterwards, document what happened and add a preventive check. A simple routine is to run a test conversion after each site release, review conversion status weekly, get an alert if daily conversions fall below a threshold and keep one named owner for tracking. If the problem keeps recurring, or the numbers no longer agree across systems, a performance marketing audit or attribution review will likely pay for itself.
FAQ
They use different identification, attribution and timing. Common causes are lost GCLIDs, an action that is not primary or not in the campaign goal, or reporting by click date. Check tag firing and the All conversions column.
Tag-based conversions can appear within hours, while imports and offline uploads can take longer. They are normally attributed to the click date, so recent days keep changing. Avoid judging performance on the most recent days alone.
Not automatically. Compare leads in your CRM to judge whether the campaigns still work. If the outage is short, fix it and use data exclusions where relevant. Reduce spend if you cannot see whether traffic converts and the budget at risk is significant.
Data-driven attribution can split credit across several clicks, which produces fractions. That is normal, and it is not a sign of an error. Compare with your actual lead or order counts over the same period.